Table of Contents
Advertisement
Appendix B - Using the SU Installer Monitor Program
Radio Parameters Menu
The Radio Parameters menu includes the following options:
Show
Bandwidth
Uplink (Tx) frequency
Show
Select this option to view the radio parameters. The Base Station ID
parameters are applied only after reset. Therefore, actual values may
differ from configured values. For each parameter both the actual and
configured values are displayed:
Bandwidth: The bandwidth in MHz used by the radio.
Tx Central Frequency: The central transmit frequency in MHz.
Rx Central Frequency: The central receive frequency in MHz. This is
not a configurable parameter – the Rx frequency is calculated as the
configurable Uplink (Tx) Frequency plus 100 MHz.
Bandwidth
Select this option to define the bandwidth of the signal.
The available options are 1.75 MHz and 3.5 MHz.
The default Bandwidth is 3.5 MHz.
Uplink (Tx) Frequency
Select this option to define the transmit frequency of the SU.
The available options are:
For a Bandwidth of 3.5MHz: 3401.25 to 3498.25 MHz
For a Bandwidth of 1.75MHz: 3400.375 to 3499.125 MHz
For both options the resolution is 0.125 MHz
NOTE
Some frequencies are available only with a Bandwidth of 1.75 MHz.
(3400.375-3401.125, 3498.375-3499.125). Prior to selecting any of these frequencies
the Bandwidth must be configured to 1.75 MHz.
B-18
BreezeMAX System Manual
Advertisement
Table of Contents
