Table of Contents
Advertisement
Base Station ID Parameters Menu
Each AU (sector) in the network is configured with a unique Base
Station ID that is comprised of Operator ID, Cell ID and Sector ID. The
Base Station ID parameters in the SU define the AU(s) that can
synchronize with the SU. These parameters include the 3 components
of a base ID for the Base Station (Operator ID, Cell ID, Sector ID and
Base Station ID), and a Base Station ID Mask. The SU can synchronize
only with AUs with a Base Station ID that is included in the IDs range
defined by the applicable parameters in the SU (base ID of the Base
Station that is comprised of Operator ID, Cell ID and Sector ID, and the
Base Station ID Mask.
The Base Station ID Parameters menu includes the following options:
Show
Operator ID
Cell ID
Sector ID
Base Station ID Mask
Show
Select this option to view the base station ID parameters and the ID of
the connected AU (if applicable). The Base Station ID parameters are
applied only after reset. Therefore, actual values may differ from
configured values. For each parameter both the actual and configured
values are displayed:
Operator ID: the base ID of the operator. The unit can synchronize
only with AUs with an Operator ID in the range defined by this
Operator ID and the Operator ID part of the Base Station ID Mask.
Cell ID: the base ID of the cell. The unit can synchronize only with
AUs with a Cell ID in the range defined by this Cell ID and the Cell
ID part of the Base Station ID Mask.
Sector ID: the base ID of the sector. The unit can synchronize only
with AUs with a Sector ID in the range defined by this Sector ID and
the Sector ID part of the Base Station ID Mask.
Base Station ID Mask: used with the Operator ID, Cell ID and Sector
ID to define the range of AU Base Station ID(s) that the unit can
synchronize with.
Manual Revision 1.0
Base Station ID Parameters Menu
B-15
Advertisement
Table of Contents
