Table of Contents
Advertisement
Chapter 4 - Operation and Administration
A ranges list of 21,42,63 means that packets with a priority from 1 to
21 will be transmitted using the first QoS Profile defined in the Uplink
QoS Profiles list (see below), packets with a priority from 22 to 42 will be
transmitted using the second QoS Profile defined in the Uplink QoS
Profiles list and packets with a priority higher than 42 (43-63) will be
transmitted using the third Uplink QoS Profile.
A ranges list that includes a single entry (63 for DSCP and 7 for 802.1p)
means that priority based classification is not used.
Uplink QoS Profiles
The Uplink QoS Profiles parameter enables to define up to four QoS
Profiles, where each entry is the QoS Profile associated with the
applicable entry in the Uplink Upper Priority Limits list. The list
includes up to four QoS Profile Names, where each name must be one of
the names that exist in the database after being defined using the QoS
Profile menu. Each entry in the Uplink QoS Profiles list is associated
with the applicable entry in the Uplink Priority Ranges list.
Downlink Upper Priority Limits
The DownLink Upper Priority Limits list functionality is the same as
that of the Uplink Upper Priority Limits list, except that the ranges are
defined for downlink communication.
Downlink QoS Profiles
The Downlink QoS Profiles list functionality is the same as that of the
Uplink QoS Profiles list, except that the QoS Profiles are associated with
the entries in the Downlink Upper Priority Limits list.
QoS Profile
The QoS Profile defines the Quality of Service parameters that are
applicable when the QoS Profile is used.
Different QoS Profile Types are available to support different service
requirements:
4-76
BreezeMAX System Manual
Advertisement
Table of Contents
