Table of Contents
Advertisement
Appendix B - Using the SU Installer Monitor Program
Using the Program
This section describes the Monitor program structure and navigation
rules.
Each menu or submenu displays a list of numbered options. To
access an option, enter the number of the required option at the >
prompt and press the Enter key.
The header of each displayed item includes the unit identification
(MAC Address), the running SW version and the name of the current
item.
The first selectable item in each menu is the Show option, enabling
to view the current configuration of the applicable parameters. For
some menus some additional status information is displayed.
At any point in the program, you can use the Esc key to return to
the previous menu (one level up) without applying any change.
Configurable parameter's menu displays the current value/status of
the parameter and provides instructions related to configuration
changes. These instructions may include the permitted value range
for the parameter, the permitted format or the selectable options.
Each change in a parameter 's configuration must be confirmed by
the Enter key. If the new value/option is a valid one, the program
will return to the previous menu. Entry of a wrong value will be
indicated by an appropriate error message, and the configuration
change text will be displayed again.
Changes to certain parameters are applied only after reset. For
these parameters, the applicable Show menus display both Current
and Configured values.
If the Monitor program is not used for 10 minutes, the session will
be terminated automatically.
Select the Exit option in the Main menu to exit the program and
terminate the session.
B-4
BreezeMAX System Manual
Advertisement
Table of Contents
