Table of Contents
Advertisement
NOTE
An SU that is defined as Temporary will be deleted from the database once it is
disconnected.
Show Summary by AU
Select this option to view the total number of SUs connected to a
specific AU as well as main details on these SUs. You will be prompted
to select the required AU Slot ID.
SW Files in NPU
Up to three SU SW files may be stored in the NPU. Any of the available
files may be loaded by the NPU to a selected SU. Once three SU files
are stored in the NPU, a new file cannot be added until at least one of
the existing files is deleted. This menu enables viewing the current SU
SW files stored in the NPU and deleting selected file(s). It also enables
defining a Default SU File, which is the file to be loaded to any new
temporary SU when the Base Station operates in Quick mode in order
to provide it with the defined Default Service(s). Refer to
– General Parameters
and Default SU Profiles.
Show Files
Select this option to display the SU SW files currently stored in the
NPU. For each available SW file, the file name and the version number
are shown.
In addition, the Default SW File Name and Default Action are also
displayed.
Default File Name
The Default File Name is the name of the SU file to be used for new
temporary SUs when operating in Quick mode.
Manual Revision 1.0
on page 4-67 for more information on Quick Mode
SU Menu
Services Menu
4-49
Advertisement
Table of Contents
