Table of Contents
Advertisement
Chapter 2 - Installation
Installing the CPE-IDU-1D Indoor Unit
Installation Requirements
Packing List
BMAX-CPE-IDU-1D
Wall mounting kit
Mains power cord
Additional Installation Requirements
Ethernet cable(s): a crossed cable if connecting to a hub/switch and
a straight cable if connecting directly to a PC Network Interface Card
(NIC).
NOTE
The length of the Ethernet cable connecting CPE-IDU-1D to the user's equipment,
together with the length of the IDU-ODU cable, should not exceed 100 meters.
Mains plug adapter or termination plug (if the power plug on the
supplied AC power cord does not fit local power outlets).
Portable PC with an Ethernet card and a crossed Ethernet cable for
configuring parameters using Telnet. TFTP server SW is required for
downloading SW versions.
Other installation tools and materials (a drill for wall-mounting the
unit, means for securing cables to walls, etc.)
2-36
BreezeMAX System Manual
Advertisement
Table of Contents
