Chapter 4 - Operation and Administration
Show Files
Select this option to display the AU SW files currently stored in the
NPU. For each available SW file, the file name and the version are
shown.
Delete a File
Select this option and enter the name of an existing AU SW file to delete
it from the NPU's memory.
Select
Use this option and select a slot to access the AU Slot # menu that will
enable managing and configuring the AU in the selected slot, or pre-
configuring the AU that will be installed in the slot at a later stage.
The available AU slot IDs are 1-4, 7-9.
AU Slot # Menu
The AU Slot # menu enables managing and configuring the AU in the
selected slot, or pre-configuring the AU that will be installed in the slot
at a later stage. The AU Slot # menu includes the following options:
Show
Unit Control
Configuration
Performance Monitoring
Show
Select this option to view the current value/selected option of applicable
parameters. In addition, some general status information is shown, as
follows:
General Parameters:
Serial Number
IDU HW Revision
IDU HW Configuration Description
4-32
BreezeMAX System Manual