Alvarion BreezeMAX 3500 System Manual page 179

Hide thumbs Also See for BreezeMAX 3500:
Table of Contents

Advertisement

To define a new Service Pipe "from scratch":
1. Define the QoS profiles that should be available for the required
Priority Classification Profiles (Uplink/Downlink QoS Profiles) and
for the required Forwarding Rules (Multicast QoS Profile).
2. Define the Priority classification Profiles that should be available for
the required Service Profiles. All QoS Profiles required for the
Uplink/Downlink QoS profiles list must be defined previously.
3. Define the Forwarding Rules that should be available for the
required Service Profiles. The QoS Profiles required for the Multicast
QoS Profile parameter must be defined previously.
4. Define the Service Profiles that should be available for the required
Service Pipes. All required Priority classification Profiles and
Forwarding Rules must be defined previously.
5. Define the relevant Subscribers.
6. Verify that all applicable SUs are defined.
7. Use existing Subscriber Name, SU MAC Address and Service Profile
Name to define the required Service Pipe
Once there are various QoS Profiles, Priority classification Profiles,
Forwarding Rules, Service Profiles, Subscribers and SUs in the
database, you can skip one or more of the steps 1 to 6.
Default Service Profiles
At manufacturing stage, each NPU is configured with a set of Default
Service Profiles. Certain parameters of these Default Profiles may be
modified to reflect specific implementation requirements. When the
software version is upgraded, these Default Service Profiles will not be
installed again in the NPU. This is to prevent configuration problems
that may occur if the modified Default Service Profiles differ from the
factory loaded Default Profiles.
The Default Service Profiles are:
Basic L2 Internet Access – for basic Internet Access service with
Best Effort QoS, utilizing L2 Service Type. This is the recommended
Default Service Profile for Quick mode.
Basic PPPoE Internet Access - for basic Internet Access service
with Best Effort QoS, utilizing PPPoE Service Type.
Manual Revision 1.0
Services Menu
4-79

Advertisement

Table of Contents
loading

Table of Contents