Parameter
Ethernet Port Operation Mode
Common Name
Organization Name
Address
Country Code
Operator ID
Cell ID
Sector ID
Base Sector ID Mask
Bandwidth
Uplink (Tx) Frequency
NOTE
Some parameters are changed to their new values only after reset (refer to
for more details). Once the basic parameters are configured, the unit should be reset in
order to activate the new configuration.
Manual Revision 1.0
Table 3-9: SU's Basic Parameters
Default Value
Auto Negotiation
186.190.0
0.0
0
255.255.255.0
3.5 MHz
3451.75 MHz
SU Commissioning
Comment
Must be supplied by
administration to ensure
uniqueness in the entire
network
Optional – according to
administrator policy.
Optional– according to
administrator policy.
Optional– according to
administrator policy.
Appendix B
3-11