Table of Contents
Advertisement
Show Test Parameters and Results
Select this option to see the parameters of the last BER test and the
results. The displayed results include the measured BER in the uplink
and downlink.
Burst Error Rate Counters
The Burst Error rate Counters option enables selecting a specific SU by
its MAC address for viewing or resetting the Burst Error Rate counters
for the applicable downlink. The information displayed for each rate in
downlink is the accumulated number since the last time the counters
were reset. The uplink counters can be viewed in the applicable SU. For
each rate the displayed information includes:
Total Burst
Error Bursts
Error Rate
The counters are reset each time the AU is reset, or upon activating the
Reset option.
Manual Revision 1.0
AU Menu
4-47
Advertisement
Table of Contents
