Table of Contents
Advertisement
Unit Control
The Unit Control menu enables changing the access password, resetting
the unit, setting factory defaults, managing the SW versions of the unit
and creating a backup file.
The Unit Control menu includes the following options:
Change Password
Reset
Set Factory Defaults
SW Versions Control
Backup
The features and options available in the Unit Control menu of the
Micro Base station are identical to those available in the Unit Control
menu of the NPU. For more details refer to
4-19.
Configuration
The Configuration menu of the Micro Base Station enables you to
configure various parameters. The parameters available in the
Configuration menu of the Micro Base Station are very similar to those
available in the Configuration>Update options of the Base Station, NPU
and AU menus of the NPU Monitor.
The Configuration menu of the Micro Base Station includes the
following options:
General Parameters (For details refer to
on page 4-16).
Management Port (For details refer to
on page 4-23).
Data Port (For details refer to
Authorized Managers (For details refer to
page 4-26).
Bridge (For details refer to
MAC (For details refer to
Phy (For details refer to
Manual Revision 1.0
Unit Control (NPU)
Configuration (Base Station)
Management Port Parameters
Data Port Parameters
Authorized Managers
Bridge
on page 4-27)
MAC Parameters (AU)
Phy Parameters (AU)
on page 4-38).
Micro Base Station Menu
on page
on page 4-25).
on
on page 4-37).
4-11
Advertisement
Table of Contents
