Table of Contents
Advertisement
Chapter 4 - Operation and Administration
Auto Negotiation Option (µBST)
The Data port of the µBST can be configured to operate with Auto
Negotiation Option enabled or disabled.
The default is Enabled.
When the Auto Negotiation Option is enabled, the Speed and Duplex
parameter in the relevant Show menus displays the detected operation
mode. When the Auto Negotiation Option is disabled, the Speed and
Duplex parameter in the relevant Show menus displays the configured
operation mode. Upon selection of the Disable option, the user is
prompted to select the speed and duplex:
Select Link speed and Duplex
This option is applicable only when the Auto Negotiation Option is
disabled. The available options are 10Mbps Half Duplex, 10Mbps Full
Duplex, 100Mbps Half Duplex and 100Mbps Full Duplex.
Authorized Managers
The Authorized Managers submenu enables defining the properties of
management stations that are allowed to manage the Base Station.
The Authorized Manager submenu includes the following options:
Show All
Select this option to view the details of all currently defined authorized
managers.
Select
This option enables selecting an existing authorized manager for
viewing or updating it properties or for deleting it from the database.
The selection is based on the authorized manager's IP address. Refer to
the following Add section for details on the configurable parameters.
Add
Select this option to add a new authorized manager. Up to 10
Authorized Manager can be defined. The following parameters can be
configured:
IP Address
The IP address of the Authorized Manager.
4-26
BreezeMAX System Manual
Advertisement
Table of Contents
