Table of Contents
Advertisement
This manual describes the BreezeMAX 3500 ("BreezeMAX") Broadband
Wireless Access System Release 1.0 and details how to install, operate
and manage the system components.
This guide is intended for technicians responsible for installing, setting
and operating the BreezeMAX system, and for system administrators
responsible for managing the system.
This guide contains the following chapters and appendices:
Chapter 1 – System description: Describes the BreezeMAX system
and its components.
Chapter 2 – Installation: Describes how to install the system
components.
Chapter 3 – Commissioning: Describes how to configure basic
parameters, align the Subscriber Unit (SU) antenna and validate
unit operation.
Chapter 4 – Operation and Administration: Describes how to use
the Monitor application for configuring parameters, checking system
status and monitoring performance.
Appendix A – Preparing the indoor to outdoor cable: Provides
details on preparation of the indoor to outdoor Ethernet cable.
Appendix B – Using the SU Installer Program: Describes how to
access and use the SU Installer Program.
Appendix C – Software Upgrade: Describes how to load new
software files using TFTP, and how to switch to a new software
version in BreezeMAX units.
NOTE
This guide covers the installation, commissioning and administration of BreezeMAX
Base Station equipment (modular Base station and Micro Base Station) and of the CPE
with a CPE-IDU-1D indoor unit (Basic IDU). For details on installation, commissioning
and administration of other types of indoor units (Gateway IDU), refer to the manual for
the applicable equipment.
About this Guide
Advertisement
Table of Contents
