Table of Contents
Advertisement
Chapter 4 - Operation and Administration
To access the Monitor program using Telnet:
1. The PC used for accessing the Monitor program should be
configured according to the parameters configured for the applicable
port (MGMT or DATA port).
2. If you connect directly to the MGMT or DATA port, use a crossed
Ethernet cable.
3. Run the Telnet program connecting to IP address of the connected
port.
4. The Enter the passwod prompt is displayed. Enter the password
and press the Enter key to get the Main menu.
Using the Monitor Program
This section describes the Monitor program structure and navigation
rules.
Each menu or submenu includes the unit type (BreezeMAX NPU or
µBST), the running SW version and a description of the menu. When
accessing the Monitor program using Telnet, the IP address of the
applicable port is displayed after the unit type.
Each menu or submenu displays a list of numbered options. To
access an option, enter the number of the required option at the >
prompt and press the Enter key.
At any point in the program, you can use the Esc key to return to
the previous menu (one level up) without applying any change.
The first selectable item in most menus is the Show option, enabling
to view the current configuration of the applicable parameters. For
some menus some additional status information is displayed.
For certain parameters, an updated value is applied only after reset
or after a specific command. In these parameters, the configured
value may differ from the actual value. If the configured value differs
from the actual value, both values will be displayed, where the first
one is the configured value and the second one the actual value. For
example: "Bandwidth (MHz): 1.75, 3.5" means that the configured
bandwidth, to be applied after the next reset, is 1.75 MHz, and the
current actual bandwidth is 3.5 MHz.
For certain parameters the actual values may not be available (such
as when pre-configuring an AU that is not installed yet). For these
parameters a value of NA (Not available) will be displayed.
4-4
BreezeMAX System Manual
Advertisement
Table of Contents
