Table of Contents
Advertisement
Select Link speed and Duplex
This option is applicable only when the Auto Negotiation Option is
disabled. The available options are 10Mbps Half Duplex, 10Mbps Full
Duplex, 100Mbps Half Duplex and 100Mbps Full Duplex.
Data Port Parameters
These parameters define the IP parameters for the Data port connecting
the base station to the backbone. The DATA port can also be used for
In-Band (IB) management, provided that IB management is enabled. In
the current version In-Band management via the DATA port is always
enabled.
Data Port IP address
The IP address of the DATA port.
The default is 1.1.1.3.
Data Port Subnet Mask
The subnet mask of the DATA port.
The default is 255.255.255.0.
Data Port Gateway
The Gateway IP address of the DATA port.
The default is 0.0.0.0.
Data Port Management VLAN
This parameter defines the VLAN ID for management frames. If a value
between 0 to 4094 is configured for the Management VLAN ID, then the
device will accept management frames only if their VLAN tag is the same
as this value.
Available values are 0-4094 or null (empty) for No VLAN.
The default is null (No VLAN).
Data Port Speed (NPU)
The speed of the Ethernet interface, that operates always in full-duplex
mode.
The available options are 100Mbps and 1Gbps.
The default speed is 100Mbps.
Manual Revision 1.0
NPU Menu
4-25
Advertisement
Table of Contents
