Table of Contents
Advertisement
Forwarding Rule
The Forwarding Rule to be used by the Service Profile.
The Forwarding Rule must be one of the names that exist in the
database after being defined using the Forwarding Rule menu. The
Service Type defined in the selected Forwarding Rule must match the
one defined for the Service Profile.
Priority Classification Profile
The Priority Classification Profile to be used by the Service Profile.
The Priority Classification Profile must be one of the names that exist in
the database after being defined using the Priority Classification Profile
menu.
Forwarding Rule
The Forwarding Rule defines the features that affect forwarding and
switching of data. Data in L2 services may be switched only between the
Service Pipes that share the same Forwarding Rule. Data in PPPoE
service can pass only between the subscriber and an Access
Concentrator behind the Base Station.
The Forwarding Rule menu enables defining new Forwarding Rules,
viewing or editing details of previously defined Forwarding Rules and
removing Forwarding Rules from the database.
The configurable Forwarding Rule's parameters are:
Forwarding Rule Name
Forwarding Rule Name can include up to 32 printable characters.
Service Type
The Service Type for which the Forwarding Rule is defined. The Service
Type parameter is configurable only when defining a new Service Profile
(Add). It is not changeable.
The currently available Service Type options are:
1 – L2
2 – PPPoE
For more details refer to
Manual Revision 1.0
Service Types
on page 4-64.
Services Menu
4-73
Advertisement
Table of Contents
