Table of Contents
Advertisement
Table 3-1: Basic NPU/Micro Base Station Parameters
Management Option
Authorized Managers
(per manager)
The following are the guidelines for configuring the basic parameters:
All parameters of both ports should be configured. Otherwise,
default values shall be used.
If remote OOB management via a router connected to the MGMT
port is used, the parameters should be configured to ensure
different subnets for the Data port, the Management port (local OOB
management) and the Management Port Destination. The
Management Port Destination Subnet is the subnet behind a router
connected to the MGMT port.
Authorized Manager(s) must be configured properly to enable remote
management using AlvariSTAR (or another SNMP based
application).
Once the basic parameters have been configured, additional parameters
and services can be remotely configured using either SNMP
management or the Monitor application via Telnet. Alternatively, it is
possible to continue the configuration process using the Monitor
application via the MON port.
Refer to Chapter 4 – Operation and Administration for information on
how to access the Monitor application either via the MON port or via
Telnet and how to use it.
NOTE
The default password is "admin".
Manual Revision 1.0
Base Station and Micro Base Station Commissioning
Parameters
IP Address
Send Traps
Read Community
Write Community
3-3
Advertisement
Table of Contents
