Table of Contents
Advertisement
Use a crimp tool for RJ-45 connectors to prepare the wires, insert them
into the appropriate pins and use the crimp tool to crimp the connector.
Make sure to do the following:
1. Remove as small a length as possible of the external jacket. Verify
that the external jacket is well inside the service box to ensure good
sealing.
2. Take back the shield drain wire before inserting the cable into the
RJ-45 connector, to ensure a good connection with the connector's
shield after crimping.
Manual Revision 1.0
NPU/Micro Base Station Parameters Summary
A-3
Advertisement
Table of Contents
