snmp-server allow
Supported on: Wi² AP
snmp-server allow <ip address>/<mask>
Adds a host to the list of IP address from which access to the SNMP interface
is permitted.
no snmp-server allow <ip address>/<mask>
Removes a host from the list of IP address from which access to the SNMP
interface is permitted.
Parameters
<address>
</mask>
snmp-server chassis-id
Supported on: Wi² AP
snmp-server chassis-id <name>
Specifies a name to identify the Wi² AP. By default, this is set to the serial
number of the Wi² AP.
no snmp-server chassis-id
Deletes the system name.
snmp-server contact
Supported on: Wi² AP
snmp-server contact <email>
Specifies contact information.
no snmp-server contact
Deletes contact information.
Parameters
<email>
snmp-server heartbeat period
Supported on: Wi² AP
snmp-server heartbeat period <seconds>
Sets the interval between sending heartbeat traps.
Parameters
<seconds>
Wi² AP CLI Reference Guide
IP address.
Subnet mask in CIDR format. Specifies the number of
bits in the mask.
Email address.
Heartbeat interval in seconds.
Config Context
31