Subaru Legacy 2002 Service Manual page 135

Hide thumbs Also See for Legacy 2002:

Table of Contents

Fuel Injection (Fuel Systems)

7. Knock Sensor

1) Disconnect battery ground cable.

2) Remove air cleaner case.

3) Disconnect knock sensor connector.

4) Remove knock sensor from cylinder block.

KNOCK SENSOR

B: INSTALLATION

1) Install knock sensor to cylinder block.

Tightening torque:

24 N·m (2.4 kgf-m, 17.4 ft-lb)

The extraction area of the knock sensor cord must

be positioned at a 60° angle relative to the engine

2) Connect knock sensor connector.

3) Install air cleaner case.

Chapters

Table of Contents