Subaru Legacy 2002 Service Manual page 204

14) Connect accelerator cable (A).
15) Connect cruise control cable (B). (With cruise
control models)
16) Install air intake duct and air cleaner assem-
bly. <Ref. to IN-7, INSTALLATION, Air Intake
Duct.> and <Ref. to IN-6, INSTALLATION, Air
Cleaner Case.>
17) Connect connector to fuel pump relay.
18) Connect battery ground cable.
INTAKE MANIFOLD
C: DISASSEMBLY
1) Disconnect engine ground terminal from intake
manifold.
B2M4254A
2) Disconnect connector from ignition coil and
ignitor assembly.
3) Remove ignition coil and ignitor assembly.
B2M3159
4) Disconnect connector from intake air tempera-
G6M0095
ture and pressure sensor.
FU(w/oOBD)-19
Fuel Injection (Fuel Systems)
S135034A06
B2M4265
H2M2957
H2M2958
H2M2959