Subaru Legacy 2002 Service Manual page 165

Fuel Injection (Fuel Systems)
8) Install rear brake caliper. <Ref. to BR-29,
INSTALLATION, Rear Disc Brake Assembly.>
9) Tighten bolts which hold rear brake hoses hold-
ing bracket.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
10) Install parking brake cable to cabin by forcibly
pushing it forward.
11) Tighten bolts which hold parking brake cable
holding bracket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
FUEL TANK
Tightening torque:
32 N·m (3.3 kgf-m, 23.9 ft-lb)
B2M3196
12) Connect connector to ABS sensor.
13) Install propeller shaft. <Ref. to DS-14,
INSTALLATION, Propeller Shaft.>
B2M3187 14) Install rear exhaust pipe and muffler.
NOTE:
To facilitate the procedure, apply a coat of
SUBARU CRC to matching area of rubber cush-
ions in advance.
SUBARU CRC (Part No. 004301003)
(1) Install left and right rubber cushions.
B2M3185
FU-62
B2M3186
B2M3184
B2M3119