Front Catalytic Converter - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

2. Front Catalytic Converter

1) Set the vehicle on the lift.

2) Disconnect battery ground cable.

3) Disconnect front oxygen sensor connector.

(With catalytic converter)

4) Lift-up the vehicle.

5) Remove under cover.

6) Separate front and center exhaust pipe from

rear exhaust pipe.

Be careful, exhaust pipe is hot.

FRONT CATALYTIC CONVERTER

EC(w/oOBD)-3

Emission Control (AUX. Emission Control Devices)

7) Remove nuts which hold front exhaust pipe

onto cylinder heads.

8) Remove front and center exhaust pipe from

hanger bracket.

Be careful not to pull down front exhaust pipe

and center exhaust pipe.

9) Separate front catalytic converter from front

exhaust pipe.

Table of Contents