Transmission Oil - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

Periodic Maintenance Services

16. Transmission Oil

A: REPLACEMENT

1. MANUAL TRANSMISSION

1) Drain gear oil by removing drain plug after

allowing the engine to cool for 3 to 4 hours.

Before starting work, cool off the engine well.

2) Reinstall drain plug after draining gear oil and

tighten it to the specified torque.

Tightening torque:

44 N·m (4.5 kgf-m, 32.5 ft-lb)

¼ Be sure to place a gasket between the transmis-

sion case and drain plug.

¼ Replace the gasket with a new one.

¼ Each oil manufacturer has its base oil and addi-

tives. Thus, do not mix two or more brands.

3) Fill transmission gear oil through the oil level

gauge hole up to the upper point of level gauge.

Gear oil capacity:

Single range model

(3.7 US qt, 3.1 Imp qt)

Dual range model

(4.2 US qt, 3.5 Imp qt)

TRANSMISSION OIL

SA07691A2001

Table of Contents