Fuel Injection (Fuel Systems)
16. Fuel
S135052
A: OPERATION
1. RELEASING OF FUEL PRESSURE
S135052A1601
WARNING:
¼ Place "NO FIRE" signs near the working
area.
¼ Be careful not to spill fuel on the floor.
1) Disconnect connector from fuel pump relay.
2) Start the engine and run it until it stalls.
3) After the engine stalls, crank it for five more
seconds.
4) Turn ignition switch to OFF.
2. DRAINING FUEL
WARNING:
¼ Place "NO FIRE" signs near the working
area.
¼ Be careful not to spill fuel on the floor.
1) Set vehicle on the lift.
2) Disconnect battery ground cable.
S135052A16
B2M3159
S135052A1602
G6M0095
FU(w/oOBD)-48
FUEL
3) Lift-up the vehicle.
4) Remove front right side fuel tank cover.
5) Drain fuel from fuel tank.
Set a container under the vehicle and remove drain
plug from fuel tank.
6) Tighten fuel drain plug and install front right side
tank cover.
Tightening torque:
26 N·m (2.65 kgf-m, 19.2 ft-lb)
B2M3173
B2M3174
B2M3174