Subaru Legacy 2002 Service Manual page 164

5) Tighten band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
6) Install rear side fuel tank cover.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
7) Install rear suspension assembly.
WARNING:
A helper is required to perform this work.
FUEL TANK
(1) Support rear suspension assembly and
then tighten bolts which secure rear suspension
assembly.
Tightening torque:
T1: 172 N·m (17.5 kgf-m, 127 ft-lb)
T2: 108 N·m (11.0 kgf-m, 80 ft-lb)
T3: 66 N·m (6.7 kgf-m, 48 ft-lb)
B2M3194
B2M3191A
(2) Tighten bolt which holds rear shock
absorber to rear suspension arm. <Ref. to
RS-14, INSTALLATION, Link Upper.>
Tightening torque:
157 N·m (16 kgf-m, 116 ft-lb)
FU-61
Fuel Injection (Fuel Systems)
B2M3190A
B2M3189