Subaru Legacy 2002 Service Manual page 325

Mechanical
(7) Pressure switch
13) Disconnect the following hoses.
(1) Brake booster vacuum hose
(2) Heater inlet outlet hose
14) Remove power steering pump from bracket.
(1) Remove resonator chamber.
(2) Loosen lock bolt and slider bolt, and remove
front side V-belt. <Ref. to ME-45, FRONT SIDE
BELT, REMOVAL, V-belt.>
(3) Remove pipe with bracket.
ENGINE ASSEMBLY
(4) Remove bolts which install power steering
pump bracket.
B2M4257
(5) Remove power steering tank from the
bracket by pulling it upward.
B2M3419
(6) Place power steering pump on the right side
wheel apron.
B2M3390
15) Remove front and center exhaust pipe.
<Ref. to EX-5, REMOVAL, Front Exhaust Pipe.> or
<Ref.
Exhaust Pipe.>
B2M4126
ME-36
to EX(w/oOBD)-9, REMOVAL,
B2M3151
B2M3153
B2M3154A
Front
G2M0290