Subaru Legacy 2002 Service Manual page 158

Hide thumbs Also See for Legacy 2002:

Table of Contents

Tightening torque:

18 N·m (1.8 kgf-m, 13.0 ft-lb)

7) Lower the vehicle.

8) Remove sub service hole cover.

9) Disconnect connector from fuel sub level sen-

10) Disconnect fuel jet pump hose.

11) Remove fuel sub level sensor.

12) Drain fuel from fuel tank by using hand pump.

Do not use a motor pump when draining fuel.

13) After draining fuel, reinstall fuel sub level sen-

Tightening torque:

T: 4.4 N·m (0.45 kgf-m, 3.3 ft-lb)

If you have not removed fuel tank yet, proceed with

the procedure below for installation.

(1) Connect fuel jet pump hose.

Fuel Injection (Fuel Systems)

Chapters

Table of Contents