Subaru Legacy 2002 Service Manual page 206

13) Disconnect air by-pass hose from purge con-
trol solenoid valve.
(A) Throttle position sensor
(B) Idle air control solenoid valve
(C) Air by-pass hose from purge control solenoid
valve
14) Remove harness bands (A) and harness
bracket (B) which hold engine harness onto intake
manifold.
15) Remove engine harness from intake manifold.
16) Remove purge control solenoid valve.
INTAKE MANIFOLD
17) Remove bolt which installs injector pipe on
intake manifold as shown in figure.
H2M2949A
18) Remove bolt which installs injector pipe on
intake manifold.
19) Remove two bolts which hold fuel pipes on the
left side of intake manifold.
B2M4271A
20) Remove fuel injectors.
(1) Remove fuel injector securing clip.
H2M2964
FU(w/oOBD)-21
Fuel Injection (Fuel Systems)
H2M2965
H2M2966
B2M4272
H2M2969