Subaru Legacy 2002 Service Manual page 173

Hide thumbs Also See for Legacy 2002:

Table of Contents

Fuel Injection (Fuel Systems)

9) Remove access hole lid.

10) Disconnect connector from fuel pump.

11) Move clips and then disconnect jet pump hose

12) Disconnect quick connector and then discon-

nect fuel delivery hose (A) and return hose (B).

<Ref. to FU-78, REMOVAL, Fuel Delivery, Return

and Evaporation Lines.>

13) Remove nuts which install fuel pump assem-

bly onto fuel tank.

14) Take off fuel pump assembly from fuel tank.

B: INSTALLATION

Install in the reverse order of removal. Do the fol-

(1) Always use new gaskets.

(2) Ensure sealing portion is free from fuel or for-

eign particles before installation.

(3) Tighten nuts in alphabetical sequence shown

in figure to specified torque.

Tightening torque:

5.9 N·m (0.6 kgf-m, 4.3 ft-lb)

C: DISASSEMBLY

1) Remove fuel pump and pump holder.

When disassembling pump holder, be careful as it

is installed with two pawls.

2) Disconnect connector from fuel pump.

Chapters

Table of Contents