Fuel Injection (Fuel Systems)
5) Remove intake air temperature and pressure
sensor from intake manifold.
6) Disconnect connectors from throttle position
sensor and idle air control solenoid valve.
7) Remove throttle body.
8) Disconnect pressure regulator vacuum hose
from intake manifold.
9) Remove fuel pipe protector LH.
INTAKE MANIFOLD
10) Remove fuel pipe protector RH.
H2M2960
11) Disconnect connectors from fuel injectors.
12) Disconnect connector from purge control sole-
noid valve.
H2M2951
H2M2961
B2M4129
FU(w/oOBD)-20
B2M4130
B2M3371
H2M2963