Hot-Keys - Barco TransForm A series User Manual

4.7.4 Hot-keys

The commands for controlling the illumination units of an O
keys on the T F A keyboard.
RANS ORM
hot-keys
C - S -
TRL LEFT HIFT LEFT
C - S -
TRL LEFT HIFT LEFT
C - S -
TRL LEFT HIFT LEFT
C - S -
TRL LEFT HIFT LEFT
The keys Ctrl-left (left Control key) and Shift-left (left Shift key) must be pressed until the hot-key sequence is
finished by entering the number of the respective projection module and the desired command.
In the configuration file of TransForm A the hot-keys can be re-configured. See section
Advanced configuration of TransForm
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
<number of module>
<number of module>
<number of unit>
<number of unit>
A.
V display wall can be entered directly with hot-
VER IEW
meaning
o Switching on lamp
f Switching off lamp
a Switching to analog input/In 1
d Switching to digital input/In 2
_____________________________________________________
4. Operating
Table 4-45
6.1.6
4-57