Replacing Fixed End Brackets - JLG E450A Service And Maintenance Manual

10. Install a new 8-32 x 0.500 self threading screw on the
other side.
NOTE: When tightening screws make sure screw head is
seated against link with no space in between the link
and underside of screw head. Maximum tightening
torque is 18-20 in-lbs.
3121714
SECTION 4 - BOOM & PLATFORM

Replacing Fixed End Brackets

1. Remove the rivets the same way as shown under the link
removal instructions.
MOVE THE CABLES/HOSES OUT OF THE WAY DURING THE GRINDING PROCESS
TO PROTECT THEM. KEEP THE HOSES AND CABLES COVERED TO PREVENT ANY
DEBRIS FROM GETTING ON THEM.
4-37