SECTION 7 - BASIC ELECTRICAL INFORMATION & ELECTRICAL SCHEMATICS
Figure 7-6. Use of Seal Plugs
7-6
AMP Mate-N-Lok
This connector system is widely used inside enclosures for
general-purpose interconnect. Follow the installation instruc-
tions.
DIN Connectors
This connector is typically used on hydraulic valves. Follow the
installation instructions.
Exclusions
A limited number of connectors do not benefit from dielectric
grease, or may be permanently damaged by application.
Dielectric grease may not be required in properly sealed
enclosures.
3121714