JLG E450A Service And Maintenance Manual page 325

Configuration Digit
TILT:
4
GROUND ALARM:
5
JIB:
6
JIB SWING:
7
SKYGUARD:
8
SOFT TOUCH:
9
H &T LIGHTS:
10
3121714
Table 6-2. Machine Configuration Programming Information
Number
1 5 DEGREES+CUT: Reduces the maximum speed of all boom functions to creep when tilted
more than 5 degrees and above elevation; also disallows the tower lift up, drive, telescope
out and lift up.
2 4 DEGREES+CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 4
degrees and above elevation; also disallows the tower lift up, drive, telescope out and lift up.
3 3 DEGREES+CUT: Reduces the maximum speed of all boom functions to creep when tilted
more than 3 degrees and above elevation; also disallows the tower lift up, drive, telescope
out and lift up.
1 NO: No ground alarm installed.
2 DRIVE: Travel alarm sounds when the drive function is active.
3 DESCENT: Descent alarm sounds when lift down is active.
4 MOTION: Motion alarm sounds when any function is active.
1 NO: No jib installed.
2 YES: Jib installed which has up and down movements only.
1 NO: No jib swing installed.
2 YES: Jib installed which has side to side movements.
1 NO: No Sky Guard system installed.
2 YES: Sky Guard system installed.
1 NO: No Soft Touch system installed.
2 YES: Soft Touch system installed.
1 NO: No head and tail lights installed.
2 YES: head and tail lights installed
SECTION 6 - JLG CONTROL SYSTEM
Description
Default
Number
1
ANSI USA,
ANSI Export,
CSA, JAPAN
3
CE, AUS, GB
4
2
2
2
1
1
6-9