Dimensional Data; Torque Specifications; Lubrication Specifications; Hydraulic Oil - JLG E450A Service And Maintenance Manual

SECTION 1 - SPECIFICATIONS

1.4 DIMENSIONAL DATA

Table 1-4. Dimensional Data
Machine Length (stowed)
E450A
M450AJ, E450AJ
Up and Over Platform Height
E450A
M450AJ, E450AJ
Horizontal Reach @ Maximum Up and
Over
E450A
M450AJ, E450AJ
Machine Width
Wheel Base
Working Height
Platform Height
Track Width
Tail Swing (Any Position)
Ground Clearance
E450A
M450AJ, E450AJ

1.5 TORQUE SPECIFICATIONS

Table 1-5. Torque Requirements
Description Torque Value
Wheel Lugs 170 ft. lbs.
Swing Bearing 190 ft. lbs.
(JLG Threadlocker)
* Check swing bearing bolts for security after first
50 hours of operation and every 600 hours thereaf-
ter.
1-2
18 ft. 8.0 in. (5.69 m)
21 ft. 2 in. (6.45 m)
24 ft. 7 in. (7.49 m)
25 ft. 3 in. (7.7 m)
23 ft. 1 in. (7.0 m)
23 ft. 9 in. (7.24 m)
5 ft. 9 in. (1.75 m)
6 ft. 7.0 in. (2.00 m)
51 ft. 0 in. (15.54 m)
45 ft. 0 in. (13.72 m)
5 ft. 0 in. (1.51 m)
Drive Reduced =
8.5 in. (0.22 m)
8 in. (0.20 m)
Interval Hours
150
(230 Nm)
50/600*
(260 Nm)

1.6 LUBRICATION SPECIFICATIONS

Refer to Section 1.10, Maintenance and Lubrication, for
specific lubrication procedures.

Hydraulic Oil

Table 1-6. Hydraulic Oil
Hydraulic System
Operating
Temperature Range
+0° to + 180° F
(-18° to +83° C)
+0° to + 210° F
(-18° to +99° C)
+50° to + 210° F
(+10° to +99° C)
NOTE: Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stability
for mobile hydraulic system service.
NOTE: Aside from JLG recommendations, it is not advisable to mix
oils of different brands or types, as they may not contain
the same required additives or be of comparable viscosi-
0
ties.
NOTE: When temperatures remain consistently below 20 degrees
F. (-7 degrees C.), JLG Industries recommends the use of
Mobil DTE10.
Table 1-7. Mobil DTE 10 Excel 15 Specs
ISO Viscosity Grade
Pour Point, Max
Flash Point, Min.
at 40° C
at 100° C
at 100° F
at 212° F
Viscosity Index
Density (Kg/l) @ 15°C
Density (lb/in3) @ 60° F
S.A.E. Viscosity
Grade
10W
10W-20, 10W30
20W-20
#15
-65°F (-54°C)
360°F (182°C)
Viscosity
15.8 cSt
4.07 cSt
15.8 cSt
4.07 cSt
168
0.8375
0.0302
3121714