Boom & Platform; Platform; Support Removal - JLG E450A Service And Maintenance Manual

PLATFORM

4.1

Support Removal

Figure 4-1. Location of Components Platform Support
1. Disconnect electrical cables from control console.
2. Remove the bolts securing the platform to the platform
support, then remove the platform.
3. Using a suitable lifting device, support the platform sup-
port.
NOTE: The platform support weighs approximately 77 lbs. (35 kg).
3121714
SECTION 4. BOOM & PLATFORM
4. Remove the bolts and locknuts securing the support to
5. Using a suitable brass drift and hammer, remove the
SECTION 4 - BOOM & PLATFORM
the rotator.
rotator shaft, then remove the support from the rotator.
4-1