Cylinder Head Removal - JLG E450A Service And Maintenance Manual

SECTION 5 - BASIC HYDRAULIC INFORMATION & SCHEMATICS
c. Unscrew cylinder head with hook spanner wrench.
Refer Figure 5-52. & Figure 5-53.
Figure 5-49. Cylinder Head Removal
6. Attach a suitable pulling device to the cylinder rod end.
EXTREME CARE SHOULD BE TAKEN WHEN REMOVING THE CYLINDER ROD,
HEAD, AND PISTON. AVOID PULLING THE ROD OFF-CENTER, WHICH COULD
CAUSE DAMAGE TO THE PISTON AND CYLINDER BARREL SURFACES.
5-72
7. With the barrel clamped securely, apply pressure to the
rod pulling device and carefully withdraw the complete
rod assembly from the cylinder barrel.
Figure 5-50. Cylinder Rod Support
3121714