Cover Disassembly - JLG E450A Service And Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE

Cover Disassembly

NOTE: Refer to Figure 3-17., Cover Assembly.
1. Remove O-Ring (17) from groove in Cover (6A).
2. Remove Thrust Washer (2) from Cover (6A) pockets.
3. Unscrew two Hex Head Bolts (6C) and remove Disen-
gage Cap (68) from Cover (6A).
3-20
NOTE: For reassembling unit, please refer to the exploded views in
2. Thrust Spacer 6D. Disengage Rod
3A. Input Carrier 6E. O-ring
6A. Cover 6F. Pipe Plug
6B. Disengage Cap 17. O-ring
6C. Bolt
Figure 3-17. Cover Assembly
4. Pull Disengage Rod (6D) out from Cover (6A).
5. Use appropriate tool to remove O-Ring (6E) from inter-
nal groove in Cover (6A).
6. Remove two O-Ring Pipe Plugs (6F) from Cover (6A).
the disassembly sections.
3121714