Powertrack Maintenance; Removing A Link - JLG E450A Service And Maintenance Manual

Hide thumbs Also See for E450A:

Table of Contents

4.12 POWERTRACK MAINTENANCE

NOTE: Hoses shown in the powertrack are for example only.

Actual hose and cable arrangements will be differ-

1. Clamp the bar and poly roller tightly so they do not spin

when removing the screw. With a small ¼" ratchet and a

t-20 torx bit, remove the 8-32 x 0.500 screw from one

SECTION 4 - BOOM & PLATFORM

2. Repeat step 1 and remove the screw from the other side

of track. Remove the bar/poly roller from the pow-

M450a M450aj E450aj