Assembly Instructions For Flange Connections: (Fl61 And Fl62) - JLG E450A Service And Maintenance Manual

Hide thumbs Also See for E450A:

Table of Contents

SECTION 5 - BASIC HYDRAULIC INFORMATION & SCHEMATICS

Assembly Instructions for Flange Connections:

(FL61 and FL62)

1. Make sure sealing surfaces are free of rust, splits,

scratches, dirt, foreign matter, or burrs.

2. See O-ring Installation (Replacement) for O-ring installa-

tion instructions.

3. Pre-lubricate the O-ring with Hydraulic Oil.

4. Position flange and clamp halves.

5. Place lock washers on bolt and bolt through clamp

6. Tighten all bolts by hand.

7. Torque bolts in diagonal sequence in two or more incre-

ments to the torque listed on Table 5-31, Flange Code

(FL61 & FL62) - Inch Fasteners and Table 5-32, Flange

Code (FL61 & FL62) - Metric Fasteners.

Troubleshooting

M450a M450aj E450aj