Configuration Commands - SMC Networks SMC TigerStack IV SMC6224M Management Manual

Privileged Exec mode from within Normal Exec mode, by entering the
enable command, followed by the privileged level password "super"
(page 4-36).
To enter Privileged Exec mode, enter the following user names and
passwords:
Username: admin
Password: [admin login password]
CLI session with the SMC6624M is opened.
To end the CLI session, enter [Exit].
Console#
Username: guest
Password: [guest login password]
CLI session with the SMC6624M is opened.
To end the CLI session, enter [Exit].
Console>enable
Password: [privileged level password]
Console#

Configuration Commands

Configuration commands are privileged level commands used to modify
switch settings. These commands modify the running configuration only
and are not saved when the switch is rebooted. To store the running
configuration in non-volatile storage, use the copy running-config
startup-config command.
The configuration commands are organized into different modes:
• Global Configuration - These commands modify the system level
configuration, and include commands such as hostname and
snmp-server community.
• Access Control List Configuration - These commands are used for
packet filtering.
• Interface Configuration - These commands modify the port
configuration such as speed-duplex and negotiation.
E C
NTERING OMMANDS
4-9