Show Map Ip Port - SMC Networks SMC TigerStack IV SMC6224M Management Manual

show map ip port

Use this command to show the IP port priority map.
Syntax
show map ip port [interface]
interface
• ethernet unit/port
- unit - Stack unit.
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Console#show map ip port
TCP port mapping status: enabled
Port
--------- -------- ---
Eth 1/ 5
Console#
Related Commands
map ip port (Global Configuration) (4-228)
map ip port (Interface Configuration) (4-228)
(Range – SMC6224M: 1-8, SMC6248M: 1-4, mixed stack: 1-4)
Port no. COS
80 0
P C
RIORITY OMMANDS
4-233