Show Interfaces Switchport - SMC Networks SMC TigerStack IV SMC6224M Management Manual

C L
OMMAND INE

show interfaces switchport

This command displays the administrative and operational status of the
specified interfaces.
Syntax
show interfaces switchport [interface]
interface
• ethernet unit/port
- unit - Stack unit.
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-4)
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 24.
Console#show interfaces switchport ethernet 1/24
Broadcast threshold:
LACP status:
Ingress rate limit: disable, Level: 30
Egress rate limit: disable, Level: 30
VLAN membership mode:
Ingress rule:
Acceptable frame type:
Native VLAN:
Priority for untagged traffic: 0
Gvrp status:
Allowed Vlan:
Forbidden Vlan:
Private-VLAN mode:
Private-VLAN host-association: NONE
Private-VLAN mapping:
Console#
4-154
I
NTERFACE
(Range – SMC6224M: 1-8, SMC6248M: 1-4, mixed stack: 1-4)
Enabled, 600 octets/second
Enabled
Hybrid
Disabled
All frames
1
Disabled
1(u),
NONE
NONE