Ip Http Secure-Port; Table 4-13 Https System Support - SMC Networks SMC TigerStack IV SMC6224M Management Manual

• The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet Explorer
5.x and Netscape Navigator 6.2 or later versions.
• The following web browsers and operating systems currently support
HTTPS:
Web Browser
Internet Explorer 5.0 or later
Netscape Navigator 6.2 or later
• To specify a secure-site certificate, see "Replacing the Default
Secure-site Certificate" on page 4-56. Also refer to the copy command
on page 4-86.
Example
Console(config)#ip http secure-server
Console(config)#
Related Commands

ip http secure-port (4-43)

copy tftp https-certificate (4-86)
ip http secure-port
This command specifies the UDP port number used for HTTPS
connection to the switch's web interface. Use the no form to restore the
default port.
Syntax
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS.
(Range: 1-65535)
Default Setting
443

Table 4-13 HTTPS System Support

Operating System
Windows 98,Windows NT (with service pack
6a), Windows 2000, Windows XP
Windows 98,Windows NT (with service pack
6a), Windows 2000, Windows XP, Solaris 2.6
S M
YSTEM ANAGEMENT
C
OMMANDS
4-43