Rate-Limit Granularity - SMC Networks SMC TigerStack IV SMC6224M Management Manual

C L
OMMAND INE

rate-limit granularity

Use this command to define the rate limit granularity for the Fast Ethernet
ports, and the Gigabit Ethernet ports. Use the no form of this command
to restore the default setting.
Syntax
rate-limit {fastethernet | gigabitethernet} granularity
[granularity]
no rate-limit {fastethernet | gigabitethernet} granularity
• fastethernet – Fast Ethernet granularity
• gigabitethernet – Gigabit Ethernet granularity
• granularity – Sets rate limit granularity for the system. For Fast
Ethernet, choose 8 Kbps, 64 Kbps, 512 Kbps, 1 Mbps, 2 Mbps,
or 3.3 Mbps. For Gigabit Ethernet, choose 32 Kbps, 64 Kbps,
512 Kbps, 1 Mbps, 2 Mbps, 3.3 Mbps, 10 Mbps, or 33.3 Mbps.
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Global Configuration (Ethernet, Port Channel)
Command Usage
Actual rate limit = Rate limit level * Granularity
Example
The following sets Fast Ethernet granularity to 1 Mbps, and Gigabit
Ethernet granularity to 33.3 Mbps.
Console(config)#rate-limit fastethernet granularity 1000
Console(config)#rate-limit gigabitethernet granularity 33300
Console(config)#
4-160
I
NTERFACE