Timeout Login Response - SMC Networks SMC TigerStack IV SMC6224M Management Manual

C L
OMMAND INE
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.
Example
Console(config-line)#password 0 secret
Console(config-line)#
Related Commands
login (4-16)
password-thresh (4-20)

timeout login response

This command sets the interval that the system waits for a user to log into
the CLI. Use the no form to restore the default.
Syntax
timeout login response [seconds]
no timeout login response
seconds - Integer that specifies the timeout interval.
(Range: 0 - 300 seconds; 0: disabled)
Default Setting
• CLI: Disabled (0 seconds)
• Telnet: 600 seconds
Command Mode
Line Configuration
Command Usage
• If a login attempt is not detected within the timeout interval, the
connection is terminated for the session.
• This command applies to both the local console and Telnet
connections.
• The timeout for Telnet cannot be disabled.
• Using the command without specifying a timeout restores the default
setting.
4-18
I
NTERFACE