Table 4-41 Interfaces Switchport Statistics
Field
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled;
Lacp status
Ingress/Egress rate
limit
VLAN membership
mode
Ingress rule
Acceptable frame
type
Native VLAN
Priority for
untagged traffic
Gvrp status
Allowed Vlan
Forbidden Vlan
Private VLAN
mode
Private VLAN
host-association
Private VLAN
mapping
Description
if enabled it also shows the threshold level (page 4-149).
Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 4-164).
Shows if rate limiting is enabled, and the current rate limit.
(page 4-159).
Indicates membership mode as Trunk or Hybrid (page
4-199).
Shows if ingress filtering is enabled or disabled (page 4-201).
Shows if acceptable VLAN frames include all types or tagged
frames only (page 4-200).
Indicates the default Port VLAN ID (page 4-202).
Indicates the default priority for untagged frames (page
4-220).
Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-217).
Shows the VLANs this interface has joined, where "(u)"
indicates untagged and "(t)" indicates tagged (page 4-203).
Shows the VLANs this interface can not dynamically join via
GVRP (page 4-204).
Shows the private VLAN mode as host, promiscuous, or
none (4-211).
Shows the secondary (or community) VLAN with which this
port is associated (4-212).
Shows the primary VLAN mapping for a promiscuous port
(4-213).
I
C
NTERFACE
OMMANDS
4-155
Need help?
Do you have a question about the SMC TigerStack IV SMC6224M and is the answer not in the manual?
Questions and answers