Statically Configuring A Trunk - SMC Networks SMC TigerStack IV SMC6224M Management Manual

Statically Configuring a Trunk

Command Usage
• When configuring static trunks, you
may not be able to link switches of
different types, depending on the
manufacturer's implementation.
However, note that the static trunks
on this switch are Cisco
EtherChannel compatible.
• To avoid creating a loop in the
network, be sure you add a static
trunk via the configuration interface
before connecting the ports, and also disconnect the ports before
removing a static trunk via the configuration interface.
Command Attributes
• Member List (Current) – Shows configured trunks (Trunk ID, Unit,
Port).
• New – Includes entry fields for creating new trunks.
- Trunk – Trunk identifier. (Range: 1-4)
- Unit – Stack unit.
(Range – SMC6224M: 1-8, SMC6248M: 1-4, mixed stack: 1-4)
- Port – Port identifier. (Range: 1-26/50)
P C
ORT ONFIGURATION
statically
configured
active
links
3-95