Show Mac Access-Group; Map Access-List Mac - SMC Networks SMC TigerStack IV SMC6224M Management Manual

Command Usage
• A port can only be bound to one ACL.
• If a port is already bound to an ACL and you bind it to a different
ACL, the switch will replace the old binding with the new one.
Example
Console(config)#interface ethernet 1/25
Console(config-if)#mac access-group alexander in
Console(config-if)#
Related Commands
show mac access-list (4-130)

show mac access-group

This command shows the ports assigned to MAC ACLs.
Command Mode
Privileged Exec
Example
Console#show mac access-group
Interface ethernet 1/5
MAC access-list M5 in
Console#
Related Commands
mac access-group (4-130)

map access-list mac

This command sets the output queue for packets matching an ACL rule.
The specified CoS value is only used to map the matching packet to an
output queue; it is not written to the packet itself. Use the no form to
remove the CoS mapping.
Syntax
[no] map access-list mac acl_name cos cos-value
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• cos-value – CoS value. (Range: 0-7)
A C
CCESS ONTROL
L C
IST OMMANDS
4-131